Description of the Product: This is a cement based, expanded glass bead filled, polymer reinforced exclusively developed interior and exterior thermal insulation plaster. MOMENTUM FN 50 is a mixture, of which 99% consists of inorganic raw materials, which is applied by being mixed with water in order to provide water, heat, sound and common insulation at your buildings. When applied to external and internal walls of the buildings, it provides a 40-50% of thermal saving. It protects the buildings against factors such as rainfall, snow and sun. It ensures your building to be ventilated. It is made of A1 class inflammable material. It provides a healthy environment by preventing formations such as moisture, mold, water mold, etc. from occurring at the buildings by way of its permeable material. It is an environment-friendly material.
Areas of Application: Restoration of concrete, reinforced concrete, brick, pumice concrete, autoclaved aerated concrete, plaster board, pre-cast concrete panel, OSB, old constructions and antiques, internal and external insulations.
Surface Preparation: Surfaces to be applied should be dry and clean. If the surfaces to be applied are uneven, these should be removed before plastering.
Preparation of the Plaster: A whole bag of MOMENTUM FN 50 is poured to the container in which the mixture will be prepared and then 14.5-14.5 liter of water is added and mixed in a mixer for 6-8 minutes. It is recommended to mix a full bag all at once before the mixtures are prepared. The mixture prepared should be used within 2 hours. The mixtures prepared are applied to the surface through trowel or machine.
Application Temperature: When applying MOMENTUM FN 50, ambient temperature should be above +5 C°.
Storage Conditions: It is stored at +5 ° C or above in a dry environment and without contact with water.
Shelf Life: 12 months in a dry place away from moisture.
Application: Wall surfaces to be applied should be cleaned and if there are defects on the surfaces, these defects should be removed. Plaster beads are assembled to the building surface at regular intervals. Material previously prepared is filled in between plaster beads through a steel trowel or plaster machine. Then, plaster surplus between plaster beads is removed by leveling with a gauge. A decorative-textured or plain look is provided to the surface through steel trowel. If demanded, painting is applied to the surface 48 hours after the application.
Material Consumption: It is 4.5-5,0 kg on a surface of 1 m2 for a thickness of 1 cm.